Saltar al contenido principal
Repara tus cosas
Derecho a reparar
Tienda
Volver
Volver
Cambios al paso #6
Editado por
David Van Matre
—
jue 10 nov 2011 01:42:54
Aprobación pendiente
Antes
Después
Sin cambios
Líneas de Paso
[* red] Remove the connector holding the feed roller motor to the logic board by pulling it strait up
[* blue] Remove the
_mm
T10
__mm
Torx
screw
screw on the roller panel
.
[* blue] Remove the
_mm
T10
__mm
Torx
screw
screw on the roller panel
.