Saltar al contenido principal

Cambios al paso #1

Editado por iRobot

Edicion aprobada por iRobot

Antes
Después
Sin cambios

Líneas de Paso

[* red] Remove the two 4mm Phillips screws with the PH#0 screwdriver.
-[* black] Disconnect the left (L) speaker wire from the charging port by grabbing it on both sides with the tweezers and pulling straight back.
+[* black] Disconnect the left (L) speaker wire from the charging port by grabbing it on both sides with the [product|IF145-020|tweezers] and pulling straight back.