Cambios al paso #8
Editado por Sam Goldheart —
Edicion aprobada por Sam Goldheart
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] Two cables remain before we're able to separate the ~~ saucer section ~~ headband. | |
| - | [* icon_note] This wide, reinforced connector makes us think [guide|10366|display cable|stepid=23135]—and we're not too far off, as this is the HDMI-in connector. Its cable is split in two and fed around the sides of the headband, clearly for that 50/50 side-to-side weight distribution. |
| + | [* black] This wide, reinforced connector makes us think [guide|10366|display cable|stepid=23135]—and we're not too far off, as this is for HDMI-in and a mystery (audio?) connector. |
| + | [* icon_note] Referred to collectively as the VR headset cable, this tiny package is some of the best cable management we've seen in VR. |
| [* black] The second cable, a tiny 4-pin job, powers the remaining LEDs, located on the back of the headband. |