Repara tus cosas Comunidad Tienda

Cambios al paso #8

Editado por Andrew Optimus Goldheart —

Edicion aprobada por Andrew Optimus Goldheart

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Hitting two birds with one stone, this connector handles both of the cables that run from motherboard to headband.
- [* icon_note] While this shape makes us think [guide|10366|display cable|stepid=23135], there's a giant orange ribbon cable for this display. These guys are actually HDMI.
-[* black] With the connector...disconnectered, the scope is now separated from the headband.
+[* black] Two cables remain before we're able to separate the ~~ saucer section ~~ headband.
+[* icon_note] This wide, reinforced connector makes us think [guide|10366|display cable|stepid=23135]—and we're not too far off, as this is the HDMI-in connector. Its cable is split in two and fed around the sides of the headband, clearly for that 50/50 side-to-side weight distribution.
+[* black] The second cable, a tiny 4-pin job, powers the remaining LEDs, located on the back of the headband.