Saltar al contenido principal

Cambios al paso #2

Editado por Kristen Gismondi

Edicion aprobada por Kristen Gismondi

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Use the black spudger to pry the back casing near the hinges for the screen.
+[* black] Use the nylon spudger to pry the back casing near the hinges for the screen.
[* black] Continue to pry along the edge of the back case until the back is ready to be removed.
[* icon_caution] Careful when beginning to remove the case. There is a cable attached between the bottom case and the motherboard that must be properly disconnected.