Cambios al paso #1
Editado por Weston Sapusek —
Edicion aprobada por Weston Sapusek
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* red] Use the spudger to pry up each side of the lens assembly Flat-Topped Connector at the bottom of the motherboard. | |
| [* orange] Holding back the lens assembly ribbon cable, use the spudger to lift the zero insertion force (ZIF) connector locking tab . Slide out the ribbon cable. | |
| [* yellow] Use the spudger to lift the zero insertion force (ZIF) connector locking tab located on the flash unit. Remove the ribbon cable. | |
| + | [* icon_caution] Be sure you are prying up on the hinged retaining flap, not the connector itself. |