Repara tus cosas Comunidad Tienda

Cambios al paso #1

Editado por Jeff Casper —

Edicion aprobada por Jeff Casper

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Use the spudger to pry up the lens assembly ribbon connector at the bottom of the motherboard.
-[* orange] Holding back the lens assembly ribbon cable, use the spudger to lift the ribbon cable retention tab. Slide out the ribbon cable.
-[* yellow] Use the spudger to lift the ribbon cable retention tab at the bottom of the flash assembly. Remove the ribbon cable.
+[* red] Use the spudger to pry up the lens assembly Flat-Topped Connectors at the bottom of the motherboard.
+[* orange] Holding back the lens assembly ribbon cable, use the spudger to lift the zero insertion force (ZIF) connector locking tab . Slide out the ribbon cable.
+[* yellow] Use the spudger to lift the zero insertion force (ZIF) connector locking tab. Remove the ribbon cable.