Repara tus cosas Comunidad Tienda

Cambios al paso #1

Editado por Seth Gordon —

Edicion aprobada por Seth Gordon

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Use the spludger to gently pry up the ribbon cable retention tab at the bottom of the lens assembly on the motherboard.
-[* red] Gently holding back the lens assembly ribbon connector, use the spluder to lift the ribbon cable retention tab. Remove the ribbon cable.
+[* black] Use the spudger to gently pry up the lens assembly ribbon connector at the bottom of the motherboard.
+[* black] Holding back the lens assembly ribbon connector, use the spudger to lift the ribbon cable retention tab. Gently slide out the ribbon cable.
[* icon_caution] The ribbon cables are delicate. Do not fold/bend, twist, or pull with excessive force.
-[* orange] Use the spudger to lift the ribbon cable retention tab at the bottom of the flash assembly and gently slide out the ribbon cable.
+[* black] Use the spudger to lift the ribbon cable retention tab at the bottom of the flash assembly and gently slide out the ribbon cable.