Repara tus cosas Comunidad Tienda

Cambios al paso #1

Editado por Jeff Casper —

Edicion aprobada por Jeff Casper

Antes
Después
Sin cambios

Líneas de Paso

[* black] Use the spludger to gently pry up the ribbon connector at the bottom of the lens assembly on the motherboard.
-[* red] Gently holding back the lens assembly ribbon connector, use the spluder to lift the ribbon cable retention tab. Gentle slide the ribbon cable out.
-[* icon_caution] Beware the ribbon cables are delicate and easily damaged - avoid excessive pressure or bending.
-[* orange] Use the spludger to lift the ribbon calbe retention tab at the bottom of the flash assembly and gently slide out the ribbon cable.
+[* red] Gently holding back the lens assembly ribbon connector, use the spluder to lift the ribbon cable retention tab. Remove the ribbon cable.
+[* icon_caution] The ribbon cables are delicate. Do not fold/bend, twist, or pull with excessive force.
+[* orange] Use the spudger to lift the ribbon cable retention tab at the bottom of the flash assembly and gently slide out the ribbon cable.