Cambios al paso #7
Editado por Larry Huang —
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* yellow] Using tweezers, disengage the right tab from the back right. | |
| - | [* icon_note] When the tab is disengaged, you can pull the right side upwards to raise it slightly. |
| + | [* black] Push the tweezers towards the front of the printer while pulling on the right side upwards. |
| + | [* icon_note] When the tab is disengaged, you can pull the right side upwards to raise it slightly so it stays disengaged. |