Cambios al paso #4
Editado por Larry Huang —
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] *Disengage the two tabs of the Head FFC Cover, and while disengaging the dowel with a flathead screw driver, slide it upward, and rotate it around the Hinge by 90°. |
|---|---|
| - | [* black] *Using the special tool, disengage tab A of the CSIC Assy on the right rear side of the Carriage Unit. |
| - | [* black] *Using the special tool, disengage tab B of the CSIC Assy on the right rear side of the Carriage Unit. |
| + | [* yellow] Disengage the two tabs while disengaging the middle tab with a flathead screw driver. |
| + | [* black] Slide the cover upward and rotate it around the hinge by 90°. |