Repara tus cosas Comunidad Tienda

Cambios al paso #4

Editado por Xin Chen —

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] *Disengage the two tabs of the Head FFC Cover, and while disengaging the dowel with a flathead screw driver, slide it upward, and rotate it around the Hinge by 90°.
+[* black] *Using the special tool, disengage tab A of the CSIC Assy on the right rear side of the Carriage Unit.
+[* black] *Using the special tool, disengage tab B of the CSIC Assy on the right rear side of the Carriage Unit.