Cambios a este Paso
Editado por Larry Huang —
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* icon_caution] The CR Scale is a clear plastic strip that goes across the printer. Be careful to not break it by stretching it too much. | |
| [* green] Pull the right end of the CR Scale to the right and remove the CR Scale from the right tab. | |
| - | [* violet] Push downwards to release foot 1 from the cutout on mounting plate. |
| - | [* black] Turn the coil section counterclockwise to release it from the mounting plate. |
| - | [* black] Remove spring coil from the hole on the CR Scale. |
| - | [* black] Turn the CR Scale 90 degrees to take it out of the tab. |