Cambios al paso #10
Editado por Xin Chen —
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] *Remove the three C.B.P. 2.6x8 screws that secure the Printhead using Phillips Screw Driver, No.1, and remove the Printhead by lifting it up vertically. |
|---|---|
| - | [* black] *Disconnect the two Head FFCs on the back side, and remove the Printhead. |
| + | [* black] Remove the 3 screws that secure the Printhead using Phillips Screw Driver No.1. |
| + | [* black] Remove the Printhead by lifting it up vertically. |
| + | [* black] Remove the Printhead by disconnecting the two Head FFCs on the back side. |