Repara tus cosas Comunidad Tienda

Cambios al paso #3

Editado por Xin Chen —

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] *Open the Cartridge Cover and remove all Ink Cartridges.
[* black] *Disengage the two tabs of the Head FFC Cover, and while disengaging the dowel with a flathead screw driver, slide it upward, and rotate it around the Hinge by 90°.
-[* black] Using the special tool, disengage tab A of the CSIC Assy on the right rear side of the Carriage Unit.
-[* black] Using the special tool (refer to p75), disengage tab B of the CSIC Assy on the right rear side of the Carriage Unit.
-[* black] Lift up the CSIC Assy from the Carriage Unit to disconnect the CSIC FFC, and remove the CSIC Assy.
+[* black] *Using the special tool, disengage tab A of the CSIC Assy on the right rear side of the Carriage Unit.
+[* black] *Using the special tool, disengage tab B of the CSIC Assy on the right rear side of the Carriage Unit.
+[* black] *Lift up the CSIC Assy from the Carriage Unit to disconnect the CSIC FFC, and remove the CSIC Assy.