Cambios al paso #3
Editado por Xin Chen —
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [* black] *Open the Cartridge Cover and remove all Ink Cartridges. |
|---|---|
| + | [* black] *Disengage the two tabs of the Head FFC Cover, and while disengaging the dowel with a flathead screw driver, slide it upward, and rotate it around the Hinge by 90°. |
| + | [* black] Using the special tool, disengage tab A of the CSIC Assy on the right rear side of the Carriage Unit. |
| + | [* black] Using the special tool (refer to p75), disengage tab B of the CSIC Assy on the right rear side of the Carriage Unit. |
| + | [* black] Lift up the CSIC Assy from the Carriage Unit to disconnect the CSIC FFC, and remove the CSIC Assy. |