Cambios al paso #4
Editado por wizzl dizzl —
Edicion aprobada por wizzl dizzl
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [* black] You will have to cut a couple notches out of the black cover where the wire runs. I dont get to solder much as you can tell. So I backed it up with super glue. Silly, but it works. |
|---|---|
| + | [* black] If your AC isn't working and your LEDs dont light up on your air flow buttons. Start at this board. New ones are about $175 and takes an hour if your fast to change out most mechanics would charge 2. This was free and took just over 2hr. I could do it in an hour now. |
| + | [* black] From the pic above you see you can bypass anything. |
Imagen 1
Ninguna imagen anterior
Añadido
Imagen 2
Ninguna imagen anterior
Añadido