Saltar al contenido principal

Cambios a Paso #11

Editado por Andrew Bookholt

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Use a spudger to disconnect the three-wall connector at the end of the sensorsensor.
[* black] De-route the cable from the internal plastic frameworkframe.
[* red] Remove the four screws indicated by the red circles in the diagramdiagram.
[* black] Use a spudger to disconnect the three-wall connector at the end of the sensorsensor.
[* black] De-route the cable from the internal plastic frameworkframe.
[* red] Remove the four screws indicated by the red circles in the diagramdiagram.