Saltar al contenido principal

Changes to Step #10

Editado por Miroslav Djuric

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Stop -- it's connector time! We remove a plethora (that's right, plethora, we're using our five dollar words) of connectors from the logic board, leaving only the brains behind the Thunderbolt port between us and the Display's control center.
[* black] A few T6 Torx screws are knocked out to remove the connector cover, and the Thunderbolt cable is disconnected.
[* red] Interestingly enough, the Thunderbolt cable hasthat routes into the display also plugs into a standard Thunderbolt connectorsocket on the logic board side as wellboard. Apple could have just soldered the cable wires to the board, but instead chose to implement a cover that prevents the cable from being detached from the logic boardboard's Thunderbolt socket.
[* red] Interestingly enough, the Thunderbolt cable hasthat routes into the display also plugs into a standard Thunderbolt connectorsocket on the logic board side as wellboard. Apple could have just soldered the cable wires to the board, but instead chose to implement a cover that prevents the cable from being detached from the logic boardboard's Thunderbolt socket.