Saltar al contenido principal

Cambios al paso #10

Editado por Miroslav Djuric

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Stop -- it's connector time! We remove a plethora (that's right, plethora, we're using our five dollar words) of connectors from the logic board, leaving only the brains behind the Thunderbolt port between us and the Display's control center.
[* black] A few T6 Torx screws are knocked out to remove the connector cover, and the Thunderbolt cable is disconnected.
[* red] Interestingly enough, the Thunderbolt cable has a standard Thunderbolt connector on the logic board side as well. Apple could have just soldered the cable to the board, but instead chose to implement a cover that prevents the cable from being detached from the logic board.

Imagen 3

Versión Antigua

Nueva Versión