Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Cambios al paso #9

Editado por Jake Devincenzi

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert wisdom hereTilt the motorcycle up off of its kickstand until it is vertical so that you can check the oil level.
[* black] The oil level should read somewhere between the "Low" and "Full" marks.
[* icon_note] It is common for the level to read a little high immediately after an oil change because the oil has not yet seeped into the nooks and crannies of the engine.
[* black] Add or remove oil as you see fit, then place the oil filler cap back over the oil filler hole. Turn the cap clockwise until it is snug
.
[* black] Insert wisdom hereTilt the motorcycle up off of its kickstand until it is vertical so that you can check the oil level.
[* black] The oil level should read somewhere between the "Low" and "Full" marks.
[* icon_note] It is common for the level to read a little high immediately after an oil change because the oil has not yet seeped into the nooks and crannies of the engine.
[* black] Add or remove oil as you see fit, then place the oil filler cap back over the oil filler hole. Turn the cap clockwise until it is snug
.