Saltar al contenido principal

Cambios a Paso #12

Editado por Jasper Fleischhauer

Edicion aprobada por Jasper Fleischhauer

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] At the bottom of the display assembly we find a daughter board with some components.
[* black] First we disconnect the cable coming from the motherboard and pry out the vibrator.
[* black] Next we peel off a small connector plate and disconnect the antenna cablecable.
[* black] Next we peel off a small connector plate and disconnect the antenna cablecable.
[* black] Now we are ready to carefully pry out the daughter board itself which is glued in with some double sided tape.