Cambios al paso #3
Editado por iRobot —
- Antes
- Después
- Sin cambios
Líneas de Paso
[* black] Place a jack stand just behind the jack once you have lifted the car enough to work underneath it. |
[* black] Slowly lower the jack so that the car is resting on the jack stand and then remove it. |
[* icon_note] You may need to raise the jack a little more to get the jack stand to the height setting you desire. |
[* icon_note] Many hydraulic jacks are lowered by placing the open end of the handle over a knob and turning it counter-clockwise. Consult your owners manual for your jack if you don't know how to lower it. |
[* icon_caution] '''Never''' work underneath a car that is only supported by a jack, The jack may slip or fail resulting in serious injury or death. |