Saltar al contenido principal

Cambios a Paso #2

Editado por mpalma

Edicion rechazada por Walter Galan

Sin cambios

Líneas de Paso

[* black] Slightly lift the antenna plate from the end closest to the RAM.
[* black] Carefully pull the antenna plate away from the circular rim of the outer case.
[* black] *When reassembling, at least for mine, I had to jiggle it side-to-side, slightly, before it found the magic spot to slide in and align both side tabs. Don't force it.
[* icon_caution] Do not remove the antenna plate yet. It is still attached to the AirPort/ Bluetooth board.