Cambios al paso #9
Editado por Tucker Cunnington —
Edicion aprobada por Tucker Cunnington
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] Remove 8 20mm phillips screws from the bottom plate of the carb. |
|---|---|
| - | [* black] Then carefully remove gasket from bottom plate. Use a flat head driver if needed to pry. |
| + | [* black] Remove the 8, 20mm phillips screws from the bottom plate of the carb. |
| + | [* black] Then carefully remove the gasket from bottom plate. Use a flat head driver if needed to pry. |