Saltar al contenido principal

Cambios al paso #31

Editado por Jeff Suovanen

Edicion aprobada por Jeff Suovanen

Antes
Después
Sin cambios

Líneas de Paso

[* black] Remove the battery isolation pick.
[* black] Insert a plastic card underneath the logic board at the battery connector.
-[* black] Slide the card all the way underneath the logic board, being sure to not slice into the upper button assembly cable at the edge of the iPad.
+ [* icon_caution] As you push through the adhesive at the outer edge of the logic board, be careful not to damage the upper button assembly ribbon cable that you disconnected in [guide|63740|Step 60|stepid=134002]. Position the card exactly as shown.
+[* black] Slide the card all the way underneath the logic board, separating the adhesive along the outer edge.