Saltar al contenido principal

Cambios a Paso #18

Editado por Jake Devincenzi

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert wisdom herethe dipstick back into the hole. Press it all the way in, then remove it.
[* red] There should be a thin layer of oil up to the bump on the dipstick labeled "MAX."
[* icon_note] The bump indicates the maximum amount of oil that should be in the tank while the twist at the end indicates the minimum amount. Anywhere in the cross-hatched middle area is sufficient.
[* black] After checking if the oil level is too high or too low, you can add or remove oil accordingly
.
[* black] Insert wisdom herethe dipstick back into the hole. Press it all the way in, then remove it.
[* red] There should be a thin layer of oil up to the bump on the dipstick labeled "MAX."
[* icon_note] The bump indicates the maximum amount of oil that should be in the tank while the twist at the end indicates the minimum amount. Anywhere in the cross-hatched middle area is sufficient.
[* black] After checking if the oil level is too high or too low, you can add or remove oil accordingly
.

Imagen 2

Versión Antigua

Nueva Versión