Saltar al contenido principal

Cambios a Paso #1

Editado por Jake Devincenzi

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Begin jacking up the front driver's side corner of the car by placing a jack between the two notches towards the front of the car on the long vertical part of the frame.
[* icon_note] It is helpful, but not necessarynecessary, to jack both sides of the car. Since the oil drain plug drains slightly to the passenger side of the vehicle centerline, jacking up the just the driverdriver's side is sufficient.
[* black] Slide the jack stand under the car, slightly left of the jack where the metal is still reinforced, and raise it as high as it goes before hitting the carframe.
[* icon_note] It is helpful, but not necessarynecessary, to jack both sides of the car. Since the oil drain plug drains slightly to the passenger side of the vehicle centerline, jacking up the just the driverdriver's side is sufficient.
[* black] Slide the jack stand under the car, slightly left of the jack where the metal is still reinforced, and raise it as high as it goes before hitting the carframe.
[* icon_note] You can release the jack and let the car rest on the jack stand, but we prefer to leave the jack in the reinforced area with the jack stand in place as a fail-safe.