Cambios al paso #1
Editado por steve —
Edicion aprobada por Jake Devincenzi
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] Use the flat end of a spudger to free the adhesive loop securing |
|---|---|
| + | [* black] Use the flat end of a spudger to free the adhesive loop securing the I/O board power cable to the upper case. |
| [* black] Disconnect the I/O board by pulling the power cable away from its socket on the logic board. | |
| [* icon_note] Pull the cable parallel to the face of the logic board toward the front edge of the Air. |