Saltar al contenido principal

Cambios a Paso #2

Editado por Brett Hartt

Edicion aprobada por Brett Hartt

Eliminado
Añadido
Sin cambios

Líneas de Paso

[title] Readjusting the Floating Caliper Alignment Peg
[* black] Using your fingers, pull the alignment peg out of its hole in the stationary caliper.
[* black] If necessary apply some '''generic peg grease'''Apply a thin layer of grease to the alignment peg.
[* black] If necessary apply some '''generic peg grease'''Apply a thin layer of grease to the alignment peg.
[* black] Re-install the alignment peg, but do not push it all the way in. Only push it in about half-way.