Saltar al contenido principal

Cambios a Paso #3

Editado por Andrew Bookholt

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Lift the inner edge of the optical drive and maneuver its connector past the GPU frame attached to the logic board.
[* black] Carefully pull the optical drive off its mounting pins on the right side of the outer case to gain clearance for disconnecting the optical drive cable.
[* black] Allow the optical drive to hang down as you de-route the optical drive thermal sensor connector from behind the GPU heat sink.

Imagen 1

Ninguna imagen anterior

Añadido