Saltar al contenido principal

Cambios a Paso #1

Editado por Ron Davis

Edicion aprobada por Ron Davis

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_note] Four round, plastic plugs are located on the back of the device.
[* red] Using a small flat head screwdrivermetal spudger, carefully pry open theseup the plastic covers.
[* icon_noteicon_caution] The covers are all glued on, so be careful not to scar the casing when prying them off. If possible, use a spudger or plastic opening tool to remove them.
[* red] Using a small flat head screwdrivermetal spudger, carefully pry open theseup the plastic covers.
[* icon_noteicon_caution] The covers are all glued on, so be careful not to scar the casing when prying them off. If possible, use a spudger or plastic opening tool to remove them.