Saltar al contenido principal

Cambios a Paso #4

Editado por Eric Essen

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* blacktitle] Checking the new spark plug
[* icon_noteblack] Always inspect your new spark plugs before installing. Check the gap on your replacement spark plugs with a feeler gauge. It should be set to .040 inches.
[* icon_note] MakeIf they are not pre-installed, make sure that the crush washer and screw on plugterminal nut are installed.
[* blacktitle] Checking the new spark plug
[* icon_noteblack] Always inspect your new spark plugs before installing. Check the gap on your replacement spark plugs with a feeler gauge. It should be set to .040 inches.
[* icon_note] MakeIf they are not pre-installed, make sure that the crush washer and screw on plugterminal nut are installed.