Saltar al contenido principal

Cambios al paso #3

Editado por Halen Phillips

Edicion aprobada por Halen Phillips

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Before this key can be replaced, the key needs to be lined up properly with the metal pins. Once this is done, continue as if it were any other key.
+[* red] Before installing, the plastic receivers on the on the bottom of key need to be lined up properly with the metal pins.
+[* black] Once attached, apply light pressure until the key snaps into place. Then press a few the key a few times to confirm it works.