Saltar al contenido principal

Cambios al paso #1

Editado por Halen Phillips

Edicion aprobada por Halen Phillips

Antes
Después
Sin cambios

Líneas de Paso

[* black] Before placing, check that the key is properly orientated. The letter side should be face up.
-[* black] Place key, then apply light pressure until the key snaps into place. Press the key a few times to confirm it is secure and working properly.
+[* black] Next, place the key in the empty slot, then apply light pressure until the key snaps into place. Press the key a few times to confirm it is secure and working properly.