Saltar al contenido principal

Cambios al paso #8

Editado por Andrew Bookholt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

-[* black] To remove the hard drive, unscrew the two small black Phillips screws holding the plastic hard drive bracket to the chassis. Pull up on the white plastic tab and remove the hard drive.
+[* black] To remove the hard drive, unscrew the two small Phillips screws holding the black plastic hard drive bracket to the chassis. Pull up on the white plastic tab and lift the hard drive out of the case, being careful not to strain the SATA cable.
[* black] Carefully disconnect the Serial ATA cable.