Saltar al contenido principal

Cambios a este Paso

Editado por Tom Garabedian

Edicion aprobada por Tom Garabedian

Antes
Después
Sin cambios

Líneas de Paso

-[* black] on the back of the device you will see the circut board that is attached to the aux port and charging port. it is held in place by three wires, one that is clipped in and two that are soldered on. unclip the one that is clipped in.
+[* black] on the back of the device you will see the circut board that is attached to the aux port and charging port. it is held in place by three wires, one that is clipped in and two that are soldered on. unclip the one that is clipped in. (it may be glued in, be careful not to damage the wire during removal of glue)