Repara tus cosas Comunidad Tienda

Cambios al paso #3

Editado por Edward Pacheco —

Edicion aprobada por Edward Pacheco

Antes
Después
Sin cambios

Líneas de Paso

[* black] Remove the two screws (3mm long) using a PH0 screwdriver that are holding the hard drive into the mounting bracket.
-[* black] Pull up on the black cloth and remove it from the existing hard drive, it has some adhesive, but will simply pull off with just a small amount of force.
+[* black] Pull up on the black Mylar sheet and remove it from the existing hard drive, it has some adhesive, but will simply pull off with just a small amount of force.