Saltar al contenido principal

Cambios al paso #2

Editado por Edward Pacheco

Edicion aprobada por Edward Pacheco

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Remove the 1 screw 4mm long on the left that is holding in the hard drive using a PHO screwdriver.
-[* black] Carefully pull on the tab on the hard drive to slide it out away from the connector.
-[* black] Lift up and remove the hard drive from the computer.
+[* red] Remove the 1 screw 4mm long on the left that is holding in the hard drive using a PHO screwdriver.
+[* orange] Carefully pull on the tab on the hard drive to slide it out away from the connector.
+[* yellow] Lift up and remove the hard drive from the computer.