Paso Dell Inspiron 15 3541 Hard Drive Replacement Historial #2

Cambios al paso #2

Editado por Edward Pacheco — 15 de abr. de 2016

Edicion aprobada por Edward Pacheco

-	[* black] Remove the ~~3 screws~~ holding in the hard drive using PHO screwdriver. There are two larger screws which are 3mm long, and a smaller sized screw that is 4mm in length.
-	[* black] Carefully pull on the tab on the hard drive to slide it out from the connector.
+	[* black] Remove the 1 screw (4mm long) on the left that is holding in the hard drive using a PHO screwdriver. There are two larger screws which are 3mm long, and a smaller sized screw that is 4mm in length.
+	[* black] Carefully pull on the tab on the hard drive to slide it out away from the connector.
	[* black] Lift up and remove the hard drive from the computer.
+	[* black] Remove the two screws (3mm long) using a PH0 screwdriver that are holding the hard drive into the mounting bracket.
+	[* black] Pull up on the black cloth and remove it from the existing hard drive, it has some adhesive, but will simply pull off with just a small amount of force.