Saltar al contenido principal

Cambios al paso #1

Editado por Edward Pacheco

Edicion aprobada por Edward Pacheco

Antes
Después
Sin cambios

Líneas de Paso

+[* black] Using a PH0 sized screw driver, carefully remove the (length) screw from the bottom cover.
+[* red] Using the plastic spudger carefully pry open the bottom cover
+[* orange] Remove the 4 (length) screws holding in the hard drive using (screwdriver type, size)
+[* yellow] Carefully pull on the tab on the hard drive to slide it out from the connector.
+[* green] Lift up and remove the hard drive from the computer.