Saltar al contenido principal

Cambios al paso #4

Editado por Andrew Prater

Edicion aprobada por Andrew Prater

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Remove the two screws holding the copper tubing to the frame of the device.
-[* red] 1.5mm Torx T4 Screw
-[* orange] 3.0mm Torx T4 Screw
+[* red] Remove the 1.5mm Torx T4 screw holding the heat sink tubing to the frame of the device.
+[* orange] Remove the 3.0mm Torx T4 screw.