Saltar al contenido principal

Cambios al paso #1

Editado por John Schmidts

Edicion rechazada por David Hodson

Antes
Después
Sin cambios

Líneas de Paso

[* black] In the following steps, you will use a metal spudger to lift the front panel out from the rear case of your TouchPad.
[* icon_caution] The front panel is held in by seveneight clips (boxed in redred[two on top, Two on bottom]) that are lightly anchored to the rear case. When When you remove the front panel assembly, you are bound to break either the clips or their supports attached to the rear case. We will update this guide as we find replacement parts or a better method to remove the panel.
[* icon_caution] The front panel is held in by seveneight clips (boxed in redred[two on top, Two on bottom]) that are lightly anchored to the rear case. When When you remove the front panel assembly, you are bound to break either the clips or their supports attached to the rear case. We will update this guide as we find replacement parts or a better method to remove the panel.
[* icon_caution] As you remove the front panel assembly, also be careful not to damage the ambient light sensor (boxed in yellow) or the two antennas (boxed in orange).