Saltar al contenido principal

Cambios al paso #9

Editado por Jake Devincenzi

Edicion aprobada por Jake Devincenzi

Sin cambios

Líneas de Paso

[* black] Use your fingernail to carefully flip up the retaining flaps on the two digitizer ribbon cable ZIF sockets.
[* icon_caution] Be sure you are prying up on the hinged retaining flaps, '''not''' the sockets themselves.
[* black] Pull the digitizer ribbon cable straight out of its two sockets on the motherboard.
[* black] Pull up on the black part. It is hinged and will pop up easily. The white part is affixed to the board.