Saltar al contenido principal

Cambios al paso #9

Editado por Andrew Bookholt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Use your fingernail to carefully flip up the retaining flaps on the two digitizer ribbon cable ZIF sockets.
[* black] The retaining flaps are highlighted in the second picture.
[*
icon_caution] Be sure you are prying up on the hinged retaining flaps, not'''not''' the sockets themselves.
[* black] The retaining flaps are highlighted in the second picture.
[*
icon_caution] Be sure you are prying up on the hinged retaining flaps, not'''not''' the sockets themselves.
[* black] Pull the digitizer ribbon cable straight out of its two sockets on the motherboard.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Versión Antigua

Nueva Versión