Saltar al contenido principal

Cambios al paso #3

Editado por Walter Galan

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] As in the previous step, use a spudger to pry the front panel up from the rear case along its long edge on the volume button side of the touchpadTouchPad.
[* black] Continue to pry the front panel assembly up along the side of the touchpadTouchPad until there is a gap between it and the rear case.
[* black] As in the previous step, use a spudger to pry the front panel up from the rear case along its long edge on the volume button side of the touchpadTouchPad.
[* black] Continue to pry the front panel assembly up along the side of the touchpadTouchPad until there is a gap between it and the rear case.