Saltar al contenido principal

Cambios a Paso #4

Editado por Tai

Edicion aprobada por Miroslav Djuric

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Continue prying the remaining sides of the front panel by sliding the plastic opening tool down each edge.
[* icon_caution] Remember,Too little heat will result in excessive bending/breaking of the time saved by not returning to the heat gun when needed is not worth a broken front panelpanel, and too much will melt and destroy the LCD underneath. Take your time.
[* icon_caution] Remember,Too little heat will result in excessive bending/breaking of the time saved by not returning to the heat gun when needed is not worth a broken front panelpanel, and too much will melt and destroy the LCD underneath. Take your time.