Saltar al contenido principal

Cambios al paso #5

Editado por Miroslav Djuric

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* icon_note] If your replacement headphone jack includes the white plastic hold switch, simply reinstall the headphone jack. If your replacement part does not include the plastic hold switch, follow the next steps to transfer the plastic hold switch to your new headphone jack.
[* icon_note] If you're just trying to remove the rear panel, you can skip these stepsSteps 15 and 16.
[* icon_note] If you're just trying to remove the rear panel, you can skip these stepsSteps 15 and 16.
[* red] Remove the single Phillips screw nearest to the hold switch.
[* black] Lift the plastic portion of the Hold switch away from the orange ribbon cable.
[* icon_reminder] Ensure that the black notch lines up with the gray slider during reassembly of the switch (see picture 2).

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Versión Antigua

Nueva Versión