Saltar al contenido principal

Cambios al paso #5

Editado por David Hodson

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* icon_note] Continue lifting the motherboard assembly and rotate it until it is resting next to the rest of the device.
-[* black] Use the flat end of a spudger to flip up the tab on the [CABLE] ribbon cable ZIF connector.
+[* black] Use the flat end of a spudger or your fingernail to flip up the retaining flap on the [CABLE] ribbon cable ZIF socket.
+[* icon_caution] Be sure you are prying up on the hinged retaining flap, ***not*** the socket itself.