Saltar al contenido principal

Cambios al paso #2

Editado por David Hodson

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Use a spudger to flip up the tab on the [CABLE] ribbon cable ZIF connector.
-[* black] Disconnect the {CABLE] ribbon cable with a pair of tweezers.
+[* black] Use the flat end of a spudger or your fingernail to flip up the retaining flap on the speaker/3D control ribbon cable ZIF socket.
+[* icon_caution] Be sure you are prying up on the hinged retaining flap, ***not*** the socket itself.
+[* black] Disconnect the speaker/3D control ribbon cable with a pair of tweezers.